How to Set Water Rates for a Small System: A Board Guide
Water rates are the part of running a system that boards put off the longest, and the part that matters most. Rates pay the operator, the electric bill, the repairs and the loan payment. When they fall behind, a system cannot keep up with the work, and funders notice. This guide explains what rates need to cover, how a rate study works, and how a small board can set rates that are fair and hold up.
Your first move: pull the last two or three years of financial statements and list every cost the system pays. You cannot set a fair rate until you can see what it costs to run.
What your water rates need to cover
A rate is not a guess at what customers will accept. It is the system’s cost of service, shared fairly among the people who use it. Rates need to cover four things:
- Operations and maintenance. The operator, power, chemicals, testing, insurance, office costs and routine repairs.
- Debt payments. Any loan the system carries has a payment due, and many loan agreements require rates to cover it with room to spare.
- Replacement savings. Pipes, pumps, tanks and meters wear out. Money set aside each month turns a future emergency into a planned project.
- A cash cushion. A reserve for a main break, a failed pump or a late month of payments.
Many small systems cover the first item and part of the second, and never reach the third. That gap is how a system ends up with aging equipment and no money to replace it.
Signs your rates are too low
- Rates have not changed in several years, while costs have.
- The system spends all of its income each month and has almost nothing in savings.
- Repairs wait until something fails.
- The system struggles to meet its debt payment, or a lender has raised the question.
- The board has never seen a line-by-line cost of running the system.
- Water loss is high, so the system pays to treat water it never bills.
How to set water rates: the steps
- Get the real costs. Pull the last two or three years of financial statements and the current budget. List every expense, including the ones that are paid in kind or not yet written down.
- Count your customers and your water. Know how many connections you have, how much water you produce and how much you bill. The difference is water loss.
- List what the system will need. Include equipment replacement, required projects and any new debt. An asset list makes this much easier.
- Calculate the revenue you need. Add up operations, debt, replacement savings and a reserve target.
- Design the rate. Choose how the revenue is collected, such as a base charge plus a charge for water used. Check what the change would mean for a typical household bill.
- Look at affordability. Compare the new bill with local household incomes. If the bill is a burden for many families, talk about phasing changes in and about options for customers who struggle.
- Follow your legal process. Your bylaws, charter or state law may require public notice, a hearing or a specific vote before rates change. Confirm the steps with your attorney and your state agency before you announce anything.
- Adopt it in a public vote and record it. Put the reasons in the minutes, and tell customers what is changing and why.
- Set a review date. Check rates against costs every year, and after any large change in costs, debt or customer count.
What a water rate study is
A rate study is a written analysis, usually by an outside specialist, of what it costs to run your system and what rates would cover it. It usually includes:
- A review of the system’s revenues, expenses, debt and reserves
- A forecast of future costs, including planned projects
- A comparison of rate designs and what each means for a typical customer
- A look at affordability for your community
- A plan for phasing in changes over several years
A study gives the board a document to point to when a neighbor asks why the bill is going up. It also gives funders something concrete. USDA and many state programs ask whether a system’s rates can support a loan or the upkeep of what the project builds.
Do we need a rate study?
If rates have not been reviewed in several years, if a project or loan is on the horizon, or if the board cannot say what it costs to run the system, a study is worth doing. A small system may not need a long report. A simple, well-built rate analysis can be enough. Costs vary with the size of the system and the scope of the work, so we do not quote a typical price here. Ask for a written scope and fee before you start.
Common mistakes boards make with rates
- Waiting for a crisis. A rate that jumps to catch up is harder on customers than small steady changes.
- Leaving out replacement savings. The bill looks lower today and costs more later.
- Setting rates by comparing to the next town. Every system has its own costs, size and debt.
- Not explaining the change. Customers accept a rate increase more readily when they hear the reasons from the board before the bill arrives.
- Skipping the legal steps. A rate change that missed a required notice can be challenged.
How to pay for the work
If the cost of a rate study or an engineering report is the barrier, Communities Unlimited is a U.S. Treasury-certified Community Development Financial Institution (CDFI) that lends to rural water and wastewater systems. Our pre-development loans finance early costs such as engineering and audits, and our audits and reports loans cover required audits and reports. See our funding guide for the grants that sit alongside them.
Working with Communities Unlimited
We work alongside rural water and wastewater systems in Alabama, Arkansas, Louisiana, Mississippi, Oklahoma, Tennessee and Texas, as the southern regional affiliate of the Rural Community Assistance Partnership. Our Community Infrastructure team works with boards and operators on rate setting, asset management, compliance and funding readiness. If you are not sure whether your rates cover your costs, call (479) 443-2700 or email info@communitiesu.org. We will start by listening to what your system looks like today.
Related guides: drinking water violation notice, preliminary engineering report, water board member responsibilities, water system consolidation.
Talk with our Community Infrastructure team
It takes about two minutes. Tell us about your board and your system and we will follow up by phone or email.
Prefer to talk first? Call (479) 443-2700 or email info@communitiesu.org.
Common questions about setting water rates
At least once a year, and after any large change in costs, debt or customer count. A formal rate study every few years gives the board a firm basis for any change.
Compare what the system takes in with what it needs: operations, debt, replacement savings and a reserve. If income only covers the first one or two, rates are too low. Rates that have sat still for years while costs rose is the clearest sign.
It is a written analysis of what it costs to run the system and what rates would cover those costs. It compares rate options, shows what each means for a typical household and sets out a plan for phasing in changes.
It depends on your state, your charter or district order and your bylaws. Many require public notice or a hearing. Ask your attorney and your state agency before you announce a change.
Phase changes in over time, design the rate so basic household use stays reasonable, and ask your state agency and funders about assistance programs. A rate study can show what a change means for different households.
Boards that put rates on the agenda
Rate study
City of Blanket
Brown County · Texas
Sewer revenue was not covering the cost of running the system, so the city kept drawing on reserves. Our Community Infrastructure team reviewed the budget, projected costs forward and presented the findings to the council and to residents. The city then adopted new base and usage rates for water and sewer.
"It was a big jump — we ripped the band-aid off. But already, we’re seeing the benefit." — Rose Wigham, city secretary
Rate study and cut-off policy
Town of Mosses
Lowndes County · Alabama
The town’s rate structure had not been updated in more than 15 years. Our team completed a rate study in 2023, presented it to the board and provided a model cut-off policy. The board adopted a new rate structure and a policy for unpaid bills.

